Baykal APH 31120 Abkant Press Machine
Baykal APH 31120 Abkant Press Machine
30,038 USD
Abkant press APH 31120, Baykal
Code: APH31120
Design and performance:
the drive moves the bending beams with the help of two cylinders
solid welded steel base with minimal twisting under load
piston stroke slightly adjustable on low friction sliding tracks
protected hydro-mechanical system for correct parallelism and high repetition accuracy
solid connecting torsion bar for piston leveling
piston stroke controlled by a precise mechanical stopper built into each cylinder and electrically adjusted with pushbutton and digital positioning
independent piston stop control individually ensures fine angle adjustment and / or the ability to conically bend
high stroke and end values allow for a variety of treatments
pressure switch and gauge gently regulate bending tonnage and prevent tool bending
hydraulic overload protection
Adjustment, two-speed bending cycle enables fast approaching, slow bending and quick return
three-function foot switch: normal bending, standing of the beam at any point of travel, automatic return of the beam immediately after the foot switch is released
compact low-maintenance hydraulic sump
European hydraulic and electrical components
Standard equipment:
European type of upper tool holder with wedge adjustment
standard tool: the upper in the form of a denser neck, and the lower multiple v
front-facing operation, 600/750 mm digital readout limit (up to 0.1 mm accuracy) and two micro height adjustment buttons
pointer for digital gait positioning
hanging control unit
two lateral adjustable holding arms
hand clamps and chains to align and secure the lower die
oil level indicator
Optional equipment:
programmable (NC) Y-axis travel control and X-axis (stop) control
special tools
quick release clamps
main table (manual or motorized)
special control console for handling both hands and foot
side and rear shields in accordance with special safety rules
delimiter length different from standard
Technical data:
rated force: 1200 kN
bending length: 3100 mm
throat depth: 410 mm
engine: 11 kW
oil tank: 140 L
approximation speed: 100 mm / s
operating speed: 10 mm / s
return speed: 90 mm / s
rear stop: 1000 mm stroke; 0.1 mm precision
display and programming of positions X and Y
dimensions: 3100 × 1590 × 2750 mm
weight: 8050 kg
Machine Equipment:
laser protection
lower table bombing
upper tool in segments (knife)
bottom tool (prism)
A = 8050 mm
B = 3100 mm
C = 1590 mm
G = 870 mm
H = 2750 mm
K = 465 mm
Lp = 130mm
La = 80 mm
M = 170 mm
N = 410 mm
ProductID 2461
Model APH 31120
Manufacturer BAYKAL
Manufacture Year 2019
Status New
Origin
Turkey (Türkiye)
Location Zagreb County, Croatia
Date Added 30-Dec-2019
Abkant press APH 31120, Baykal
Code: APH31120
Design and performance:
the drive moves the bending beams with the help of two cylinders
solid welded steel base with minimal twisting under load
piston stroke slightly adjustable on low friction sliding tracks
protected hydro-mechanical system for correct parallelism and high repetition accuracy
solid connecting torsion bar for piston leveling
piston stroke controlled by a precise mechanical stopper built into each cylinder and electrically adjusted with pushbutton and digital positioning
independent piston stop control individually ensures fine angle adjustment and / or the ability to conically bend
high stroke and end values allow for a variety of treatments
pressure switch and gauge gently regulate bending tonnage and prevent tool bending
hydraulic overload protection
Adjustment, two-speed bending cycle enables fast approaching, slow bending and quick return
three-function foot switch: normal bending, standing of the beam at any point of travel, automatic return of the beam immediately after the foot switch is released
compact low-maintenance hydraulic sump
European hydraulic and electrical components
Standard equipment:
European type of upper tool holder with wedge adjustment
standard tool: the upper in the form of a denser neck, and the lower multiple v
front-facing operation, 600/750 mm digital readout limit (up to 0.1 mm accuracy) and two micro height adjustment buttons
pointer for digital gait positioning
hanging control unit
two lateral adjustable holding arms
hand clamps and chains to align and secure the lower die
oil level indicator
Optional equipment:
programmable (NC) Y-axis travel control and X-axis (stop) control
special tools
quick release clamps
main table (manual or motorized)
special control console for handling both hands and foot
side and rear shields in accordance with special safety rules
delimiter length different from standard
Technical data:
rated force: 1200 kN
bending length: 3100 mm
throat depth: 410 mm
engine: 11 kW
oil tank: 140 L
approximation speed: 100 mm / s
operating speed: 10 mm / s
return speed: 90 mm / s
rear stop: 1000 mm stroke; 0.1 mm precision
display and programming of positions X and Y
dimensions: 3100 × 1590 × 2750 mm
weight: 8050 kg
Machine Equipment:
laser protection
lower table bombing
upper tool in segments (knife)
bottom tool (prism)
A = 8050 mm
B = 3100 mm
C = 1590 mm
G = 870 mm
H = 2750 mm
K = 465 mm
Lp = 130mm
La = 80 mm
M = 170 mm
N = 410 mm
The advertisement was translated automatically and some translation errors may have occurred.





Become an Expert
If you are an expert, you can register and select your category for speciality. You must send your cv, references and technical skills for us.
Join us to become an independent and reliable expert, find your customers.
Owner:

METAL-KOVIS d.o.o.
Metal-Kovis d.o.o. is a company with rich tradition founded in 1987 in Samobor. The company's main business is sale of new and used metalworking machines, tools, and accessories and in its rich assortment has CNC machines, classic machines, accessories and measuring and cutting tools. More than 500 different machines are available daily for every need and variety of customer requirements. With years of experience, diligent work and care of quality and customer satisfaction, Metal-Kovis d.o.o. has become the leading company in the region for the distribution of metalworking machines. Metal-Kovis d.o.o. is representative and distributor of renowned European and world metal industry companies such as Baykal, Leadwell, Sahinler, Hidroliksan, Beka-Mak, Insize, BFT Burzoni, GSR and many others. In addition to sales and distribution, Metal-Kovis d.o.o. is also recognizable by an excellent service department and a top team of experts who can assist you in selecting machines for the development of your company. For larger machines, it offers the possibility of delivery to customers workshop, exchange old machines with new ones, and machine relocation services. Its mission is to further develop the metal industry, supply its customers and partners with top-of-the-range machines and tools from its distribution range, and consolidate and increase market presence with the aim of even greater customer satisfaction.
Send MessageOwner Location:




