- Working area 3200 x 1300 mm

* Suction cups for each work table with vacuum system for the locking of the working piece

* Flat work table with internal vacuum system to lock the suction cups where are placed the working pieces

* Nr. 2 vacuum pump 100/m3

* Nr. 1 boring units, each one with the following specifications

* Nr. 11 independent spindles for vertical boring in "X" direction

* Nr. 7 independent spindles for vertical boring in "Y" direction

* Nr. 1 electro-spindle in vertical position - automatic change of the tool - "C" VECTOR AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control - liquid cooling system - motor power 12 KW - HSK F63 ( 1.500 - 24.000 RPM)

EDGE BANDING UNITS

* Automatic device to apply the edge into straight profiles of shaped panels

* Applicable banding material in coils: thin edge and PVC up to 3 mm

* Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot - spreading roller to regulate the quantity of apllied glue - edge pression roller

* Multiple magazine for edge coils with nr. 3 positions, to automatically change the edge type

TOOL CHANGER MAGAZINE

* Rear tool changer magazine with nr. 12 - HSKF63 positions

* Angle drive head with 1 output for saw blade to cut the edge and to make cuts and groovings

* Top and bottom edge trimming head-unit

* Edge scraping head-unit

* Blowing head-unit to clean the panel profile by air throw

CONTROL OF THE MACHINE AND ACCESSORIES

Control and program system HOMATIC

The advertisement was translated automatically and some translation errors may have occurred.