Injection Moulding Machine 

Closing force: 6000 kN

Space between columns: 1020 x 1020 mm.

Size of plates: 1440 x 1480 mm.

Stroke of the closing unit: 850/1450 mm.

Mold height (min./max.): 330/930 mm.

Mold height with support for stacked molds (min / max): 380/930 mm.

Maximum separation between plates: 1780 mm.

Expeller stroke: 200 mm. /Ejector force: 112 kN

Diameter of the columns: 168 mm. /Maximum weight of the mold: 10,400 kg.

Empty cycle: 3.2 s. / Cycle time E6: 2.3 s.

RS injection model / Work capacity: 2733

Screw diameter: 70 mm. / L / D screw: 25.0

Injection pressure: 2030 bar.

Injection stroke: 350 mm.

Injection capacity: 1347 cm3

Heating power of the screw sleeve: 42.0 kW

Control areas of the screw sleeve: 5

Pump-based standard injection flow: 500 cm3 / s

Accumulator-assisted injection flow rate: 1819 cm3 / s

Assisted accumulator air injection rate: 3500 cm3

High-speed accumulator assisted injection flow: 4408 cm3 / s

High-speed accumulator-assisted air injection rate: 7000 cm3 / s

Car strength: 120 kN

Diameter of the molten material channel: 22 mm.

Standard screw drive

Screw speed: 273 RPM. / Screw peripheral speed: 1.00 m / s

Screw torque: 1660 Nm. / High torque screw drive

Screw speed: 177 RPM. / Screw peripheral speed: 0.65 m / s

Screw torque: 2605 Nm. / High power screw drive

Screw speed: 218 RPM. /Screw peripheral speed: 0.80 m / s

Screw torque: 2605 Nm. / High speed screw drive

Screw speed: 368.3 RPM. / Screw peripheral speed: 1.35 m / s

Screw torque: 1680 Nm. /  Oil volume: 1280 l.

Dimensions (W x H) 2.382 x 2.522 mm. / Total length (L): 10,179 mm.

Weight: 32.4 t

The advertisement was translated automatically and some translation errors may have occurred.