The machine is designed for milling straight and oblique cylindrical gears, worms. These teeth can be made using the envelope method with the help of cutters envelope.
The worms are milled with the help of conical envelope milling cutters by the tangential method or cylindrical cutters by the radial method.
It is also possible to cut the roof and internal teeth.
Roof and internal teeth require an additional device That our machine tool is equipped with.
This machine is also used for drilling and reaming peripheral holes
Gear ;class class class 9
Graduation on the circumference accuracy of ; ± 0.2 mm
Angle accuracy of division; 0.1 0
Characteristic date
Maximum diameter of detail mm without steady ø3150
Maximum diameter of the workpiece support with Ø1600 mm
Minimum diameter of ø175 mm detail
The largest tooth width with Ø350 mm cutters
with 1000 mm straight meshing
Max module teeth cut; 30 mm
The largest distance from the center of the
clamping table to the center of the milling spindle 1800 mm
Price : Price On Request | Product ID : 4213 |
Manufacturer : N/A | Model : ZFWZ-3150 X 30 |
Year : 1963 | Status : Assembled and Operative |
Origin : Poland | Duration : 56 / Year |
Last Revision Date : - | Location : - |
Date Added : 21.08.2019 |
Newest Machines in Marketplace