WMW Gotha UBR 16x2500 /1-10 Straightening Machine
WMW Gotha UBR 16x2500 /1-10 Straightening Machine
Price on Request
The machine will be modernized and refurbished. If you are interested, please contact us and we would like send you an offer.
Cold Sheet Metal Levelling Machine
techn. dimensions:
- max. throughput between the end switch: 2650mm
equipment:
- 6 pcs roller conveyors for intake/feed and outlet/ run-out, model U-beam construction with each 1 gear motor per roll conveyor band approx. 6,0 kW, chain drive for all rolls, rolls dia.= 190mm
roll conveyor description:
- 1 x roller conveyor: 2 pcs. rolls, 2500mm length, roller distance center 800mm, size (W:2,8xD:1,15xH:0,77m)
- 3x roller conveyor: 3 pcs rolls, 2500mm length,
- roller distance center 800/800 mm
- size W:2,8xD:1,85xH:0,75m
- 1x roller conveyor: 4 pcs rolls, 3x2800mm + 1x2330mm length, roller distance center 800/800/550 mm / size W:2,8xD:2,4xH:0.77m
- 1x roller conveyor: 6pcs rolls,5x2500mm+1x2330mm length,roller distance center 800/400/400/280/270mm, size W:2,8xD:2,4xH:0,77m
Modernisation work to be carried out:
- revise of 39 support mounts
- clean, inspect the bearings (replace if necessary), regrease
- turning of the outer Diameter
- check of the levelling rolls drive gear, cleaning, checking,
- revision of 13 Cardan shafts
- dismantling, cleaning, regrease, mounting
- work up 11 piece straightening rolls
- check for run-in points, hardness and diameter,
- resurfacing via fine grinding
- repainting the entire machine
- replacement of defective oil seals and gaskets, replacing the bearings if necessary
- check of the pre-transmission
- cleaning, checking, replacement of defective oil seals and gaskets,
- replacing the bearings as needed
- verification of screw jack / cleaning, checking,
- replacement of defective oil seals and gaskets, replacing the bearings if necessary
- verification of the screw jack for height adjustment of the lower straightening rolls
- cleaning, checking, replacement of defective oil seals and gaskets, replacing the bearings
if necessary
Technical Details:
- plate width: 2500 mm
- plate thickness: 16 mm
- smallest sheet thickness: 6 mm
- number of straightening rolls: 11
- roll diameter: 180 mm
- straightening roll diameter: 180 mm
- plate width: 2500 mm
- plate thickness: 16 mm
- smallest sheet thickness: 6 mm
- number of straightening rolls: 11
- roll diameter: 180 mm
- straightening roll diameter: 180 mm
ProductID 1468
Model UBR 16x2500 /1-10
Manufacturer WMW GOTHA
Manufacture Year 1974
Last Revision 2019
Status Assembled and Operative
Origin
Germany (Deutschland)
Location Sachsen, Deutschland
Date Added 01-Nov-2019
The machine will be modernized and refurbished. If you are interested, please contact us and we would like send you an offer.
Cold Sheet Metal Levelling Machine
techn. dimensions:
- max. throughput between the end switch: 2650mm
equipment:
- 6 pcs roller conveyors for intake/feed and outlet/ run-out, model U-beam construction with each 1 gear motor per roll conveyor band approx. 6,0 kW, chain drive for all rolls, rolls dia.= 190mm
roll conveyor description:
- 1 x roller conveyor: 2 pcs. rolls, 2500mm length, roller distance center 800mm, size (W:2,8xD:1,15xH:0,77m)
- 3x roller conveyor: 3 pcs rolls, 2500mm length,
- roller distance center 800/800 mm
- size W:2,8xD:1,85xH:0,75m
- 1x roller conveyor: 4 pcs rolls, 3x2800mm + 1x2330mm length, roller distance center 800/800/550 mm / size W:2,8xD:2,4xH:0.77m
- 1x roller conveyor: 6pcs rolls,5x2500mm+1x2330mm length,roller distance center 800/400/400/280/270mm, size W:2,8xD:2,4xH:0,77m
Modernisation work to be carried out:
- revise of 39 support mounts
- clean, inspect the bearings (replace if necessary), regrease
- turning of the outer Diameter
- check of the levelling rolls drive gear, cleaning, checking,
- revision of 13 Cardan shafts
- dismantling, cleaning, regrease, mounting
- work up 11 piece straightening rolls
- check for run-in points, hardness and diameter,
- resurfacing via fine grinding
- repainting the entire machine
- replacement of defective oil seals and gaskets, replacing the bearings if necessary
- check of the pre-transmission
- cleaning, checking, replacement of defective oil seals and gaskets,
- replacing the bearings as needed
- verification of screw jack / cleaning, checking,
- replacement of defective oil seals and gaskets, replacing the bearings if necessary
- verification of the screw jack for height adjustment of the lower straightening rolls
- cleaning, checking, replacement of defective oil seals and gaskets, replacing the bearings
if necessary
Technical Details:
- plate width: 2500 mm
- plate thickness: 16 mm
- smallest sheet thickness: 6 mm
- number of straightening rolls: 11
- roll diameter: 180 mm
- straightening roll diameter: 180 mm
- plate width: 2500 mm
- plate thickness: 16 mm
- smallest sheet thickness: 6 mm
- number of straightening rolls: 11
- roll diameter: 180 mm
- straightening roll diameter: 180 mm
The advertisement was translated automatically and some translation errors may have occurred.





Become an Expert
If you are an expert, you can register and select your category for speciality. You must send your cv, references and technical skills for us.
Join us to become an independent and reliable expert, find your customers.
Owner:

WMW AG
Since 25 years reputable companies are trusting in our Know-how as a specialist for used machine tools and plants. Through decades of market presence we are aware about the growing demand for always better quality machines. This results in increasingly comprehensive repairs, which already ranged in the past up to the area of the overhaul and modernization. In order to expand this area further, the Company WMW AG Maschinenbau has been founded.
https://www.wmwag.com/en/index.html
Send MessageOwner Location:




